Xp3 Diesel Fuel Enhancer
is a Multi-Functional
Problem Solver!

GDI website diesel info 51218

Select the Fuel Problem You Are Looking to Solve!

(Click one of the buttons below or scroll down to learn more about Xp3)

GDI rising maintenance costs button
GDI Emissions Equipment
GDI Water Problems and diesel bug
GDI Stabilizing Fuel
GDI Injector problems
GDI mpg power and performance

Using Xp3 Reduces Maintenance
Costs and Down Time!

Because maintenance costs and down time reduce profits, many companies are looking for ways to save money.

Fuel is the lifeline that powers your equipment, which also impacts how your equipment performs and how long it lasts.  Due to the technology involved in today’s emissions equipment and engines, they are likely to have issues with COMMON DIESEL PROBLEMS INCLUDING::

      > Reduced lubricity

      > Water contamination

      > Incomplete combustion

      > Deposits and corrosion

      > Premature failure

Using Xp3 increases lubricity, decreases wear metals in your oil, extends engine oil life, and keeps your equipment running better and longer while increasing your company’s profits. 

Be sure to check out our independent lab testing.

used oil 2

Independent Lab Testing:

GDI Download the Report

Independent Lab HFRR Report Summary

In this HFRR test performed by FOI Labs, diesel #2 was tested for a “base” lubricity score and showed a wear scar diameter of 360 microns prior to being treated with Xp3.

Then Xp3 Diesel fuel additive was added to the fuel at a treatment ratio of 1 ounce to 30 gallons of fuel (1:4000) which resulted in a wear scar diameter of 300 microns.

As demonstrated in this independent lab test, Xp3 decreased the wear scar diameter and has proven to improve lubricity.

GDI Download the Report

Xp3 Used Oil Analysis Case Study

The purpose of this case study was to prove the lubricity improvements and maintenance savings associated with using Xp3.  Prior to using Xp3, the customer sent a used oil sample to BlackStone Laboratories in Ft. Wayne, Indiana; which served as a “baseline”.

When you download the summary PDF, you will see that the customer sent in four more used oil samples taken from consecutive oil cycles using Xp3 in each tank of fuel.  These samples were taken at the end of the oil cycle and at the mileage established in the baseline sample.

Notice how Xp3 substantially improved lubricity and extends engine life, which is proven through the decrease in wear metal.  Also, note that the oil analysis proves that the customer was able to extend the oil change cycle significantly by using Xp3, which reduces maintenance costs.

Using Xp3 Reduces Water
Problems and Microbial Issues!

Water is a major contaminant in diesel fuel that is very costly for the fuel system and your engines if the problem is not addressed quickly.  Condensation, leaking storage tanks, and operating in equipment in “open air” environments like construction sites or marinas are a few of the ways that water gets into diesel fuel.

According to research done by the University of Idaho, condensation can occur with as little as a 19 degree change in temperature, which happens almost every day for most people. 

Here are some of the MAJOR PROBLEMS caused by water:

      > Poor combustion

      > Decreased lubricity

      > Microbial growth

      > Injector damage

      > Tank/engine corrosion

Xp3 disperses water that is suspended in your fuel to prevent the water that is carried to injectors and the combustion system from doing damage to vital engine parts.  Xp3 prevents water molecules from grouping together so they can’t damage your engine.

Xp3 also helps to disperse free water that has settled out of suspension which leads microbial growth, sludge, corrosion, and overall poor performance of your fuel system.

Be sure to check out our independent lab testing and documentation.

diesel bug

Independent Lab Testing:

GDI Download the Report

Click the picture above this text to download a PDF explaining water dispersion and the two types of water that every diesel engine owner needs to be concerned about in their fuel.

GDI Download the Report

Independent Lab Bacteria Test Summary

Using the ATSM D7687/E2694 standard, FOI Labs provided a sample of diesel #2 that was contaminated with microbial growth.  FOI Labs then treated the contaminated fuel with Xp3 Diesel to determine its effectiveness as a biocide.

The contaminated fuel was treated with Xp3 at a ratio of 1 ounce to 30 gallons of fuel (1:4000). As demonstrated in this independent lab test, Xp3 is an effective biocide and the contaminated fuel treated with Xp3 showed undetectable microbial growth.

Using Xp3 Protects Injectors
and Extends Engine Life!

Injectors, pistons, cylinders, vital engine components and engine oil are directly impacted by poor quality fuel, bio-fuel blends, and fuel contaminants such as water. 

Because today’s engines function under extremely high pressures and tight tolerances that require top quality fuel to ensure optimal operation. Over time, injectors and other vital engine components experience PROBLEMS CAUSED BY DIESEL FUEL including:

      > Poor performance

      > Rust and corrosion

      > Injector deposits

      > Gums and varnishes

      > Premature failure

Xp3 protects and cleans injectors, increases lubricity, improves combustion, and extends life engines.

Be sure to check out our demonstration video and case study.

new diesel-fuel-injectors3

Demo Video and Case Study:

GDI Download the Report

Xp3 Diesel Pepsi Case Study Summary

Through used oil analysis, Pepsi estimated that they could extend the engine life of their equipment by up to 25%.  Xp3 demonstrated that it improves combustion, reduces wear metals and contaminants in the oil, and cleans and protects injectors.  

By using Xp3, Pepsi experienced significant savings in MPG and maintenance costs, which positively impacts the profitability of any company!

Using Xp3 Reduces Emissions
and Emissions Equipment Issues!

Many companies are looking for ways to reduce their carbon footprint, but are now also facing issues and expenses related to Tier 4 emissions standards. 

In an effort to meet these standards, engine manufacturers are implementing diesel exhaust fluid (DEF), exhaust gas recirculation (EGR), diesel particulate filters (DPF), and selective catalytic reduction (SCR) systems. 

While these systems are effective in reducing greenhouse gases such as carbon dioxide (C02), nitrogen oxide (NOx), and particulates, they also create additional purchase and maintenance expenses including:

      > DEF consumption costs

      > DPF cleaning/replacements

      > EGR valve replacements

      > SCR system replacements

In order to keep these systems and equipment running well, they depend on quality fuel and improved combustion to help reduce the impact on these expensive systems.

Xp3 improves combustion, reduces emissions and soot, cuts DEF consumption, decreases DPF regenerations, and extends the operating life of your emissions equipment.

Be sure to check out our demonstration video and case study.

orange dpf emissions

Emissions Case Study and Testimony:

GDI Download the Report

Click the picture above this section of text to download a PDF of a used oil analysis performed by BlackStone Labs.  The report shows a before-and-after soot analysis from a 2014 International with a Cummins ISX 15.

In page 1 of the report, you’ll find the original used oil and soot analysis which was taken prior to using Xp3 for a baseline of the soot levels for this truck.  You’ll notice that before using Xp3, the soot level was documented as “fairly high” at 0.7%.

After using Xp3 in every tank of fuel for during the next oil change cycle, the soot level was reduced by 42.8%.  Less soot is evidence of better combustion, which has a positive impact on extending the life of expensive emissions systems like EGR/SCR/DPF.  In many cases, owners of equipment with Tier 4 emissions systems that use DEF experience a reduction in the amount of DEF consumed.

Extending the life of emissions equipment and reducing DEF consumption helps to reduce maintenance and operating costs!

Xp3 Emissions and Soot Video

Using Xp3 Stabilizes Fuel
and Helps with Degradation!

When compared with traditional high sulfur fuel, ultra-low sulfur diesel and biofuels are less stable, which can lead to significantly decreased shelf-life for fuel.  As diesel fuel ages, it oxidizes, breaks down, and agglomerates (clumps together); which leads to problems in the fuel system and engine. 

In a study by the University of Idaho, fuel samples were tested to show the percentage of degradation as diesel #2 is stored.  This study showed up to 26% degradation of the fuel in just 28 days.  The impact of fuel oxidation and degradation is substantial and leads to costly issues such as:

      > Gums that lead to injector deposits

      > Sediments that clog filters and injectors

      > Acids that corrode tanks and fuel systems

      > Thickening that leads to incomplete combustion

Fuel instability can also be increased by variables such higher temperatures (via the operating environment or through fuel return lines) and free water in the fuel which leads to issues with microbial growth.

Xp3 slows fuel oxidation, stabilizes fuel during storage, disperses water to reduce the effects of condensation, is an effective biocide, and helps to protect fuel storage tanks from corrosion.

Be sure to check out the additional information on fuel degradation.

 

 

Above Ground Fuel Tank

More Info on Fuel Degradation:

Click the picture above this section of text to download a PDF that explains important factors which impact fuel degradation and the problems that are caused by fuel sitting in tanks over time.

GDI Download the Report
GDI Download the Report

Independent Lab Bacteria Test Summary

Using the ATSM D7687/E2694 standard, FOI Labs provided a sample of diesel #2 that was contaminated with microbial growth. FOI Labs then treated the contaminated fuel with Xp3 Diesel to determine its effectiveness as a biocide.

The contaminated fuel was treated with Xp3 at a ratio of 1 ounce to 30 gallons of fuel (1:4000). As demonstrated in this independent lab test, Xp3 is an effective biocide and the contaminated fuel treated with Xp3 showed undetectable microbial growth.

Using Xp3 Increases Power,
Performance, and MPG!

With the rising costs of owning and operating equipment, companies are searching for ways to save money.  Due to incomplete combustion of fuel, many companies experience the significant and negative impacts of using diesel fuel including:

      > Declining MPG

      > Reduced power and performance

      > Increased DEF Use

      > Problems with EGR and SCR system

      > Decreased oil life and premature breakdowns.

Because Xp3 improves combustion, our customers experience increased power, performance, and better fuel economy (MPG).

Be sure to check out our lab tests and case studies.

GDI increasing power performance mpg

Lab Tests and Case Studies:

GDI Download the Report

Click on the picture above this section of text to download a PDF report proving Xp3 increases torque and horsepower.

In the report, Xp3 was tested using a MD Mustang Dynamometer and Mustang’s PowerDyne software.  As part of the testing, a diesel engine was tested to measure torque and horsepower while running diesel fuel that was not treated with Xp3, which served as the baseline for the testing.

The same fuel was then treated with Xp3 and ran in the same engine while connected to the dynamometer.  As seen in the documents included in this report, Xp3 increases torque and horsepower!

GDI Download the Report

Click the picture above this section of text to download a PDF report showing the fuel savings experienced in a case study of a CAT diesel generator over 30 months.

In the report, the company owner tested the average fuel consumption of the generator for one month prior to using Xp3 and showed the generator consumed an average of 6,000 gallons that month.

Over the next 18 months, the generator was run with Xp3 and the fuel consumption was tracked.  When using Xp3, the generator averaged 5,490 gallons of fuel per month, which is a savings of 8.80%.

The owner of the company was very pleased with the results, but wanted to be thorough so the testing continued.  The generator was operated using fuel that was not treated with Xp3 and averaged 195.66 gallons/10 hours.  Then, the generator was operated using fuel that was treated with Xp3 and the generator only consumed 178.10 gallons/10 hours.  Again, using Xp3 resulted in a substantial reduction (8.97%) in fuel consumption!

Xp3 substantially reduced fuel consumption, which reduces operating expenses and increased the profit for this company! 

Click Here to Shop for Xp3 Diesel Fuel Enhancer!

Click Here to Shop for Xp3 Diesel Fuel Enhancer!